Downgrading LWAPP to Autonomous with WLC


In a previous article I was telling about restoring the LWAPP to autonomous, but it’s also possible if you got access to the WLC.

(Cisco Controller) >config ap tftp-downgrade 10.10.10.15 c1250-k9w7-tar.124-21a.JA1.tar L1252-1
And you won’t see anything at the WLC, but you can see at the AP :

examining image…
Loading c1250-k9w7-tar.124-21a.JA1.tar from 10.10.10.15 (via GigabitEthernet0): !
extracting info (287 bytes)
Image info:
Version Suffix: k9w7-.124-21a.JA1
Image Name: c1250-k9w7-mx.124-21a.JA1
Version Directory: c1250-k9w7-mx.124-21a.JA1
Ios Image Size: 5693952
Total Image Size: 6431232
Image Feature: WIRELESS LAN
Image Family: C1250
Wireless Switch Management Version: 4.2.37.156
Extracting files…

About Joost van der Made

Me

2 responses to “Downgrading LWAPP to Autonomous with WLC”

  1. Oli says :

    Hi,

    Can you plase let me know what IOS code you are running on AP1242AG? I am confused because Lab print says 12.3.8.JE(x) and in IOS Config guide found:
    Cisco IOS Release 12.4(10b)JA supports the following autonomous 32 Mb platforms: •1130 series access point •1240 series access point •1250 series access point •1300 outdoor access point/bridge
    Cisco IOS Release 12.3(8)JEC is a maintenance release and supports the following autonomous 16 Mb platforms: •1100 series access point •1200 series access point •1230 series access point

    Thanks

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: