HREAP on LWAPP AP


How to see if an AP is at which state of HREAP ?
That’s possible from the CLI of the LWAPP AP.

You can do :

L1240-4#sh lwapp reap status
AP Mode: REAP, Connected
Radar detected on:

L1240-4#sh lw reap status
AP Mode: REAP, Standalone
Radar detected on:

To see the “config” of the LWAPP AP :
show derived-config

When the AP is in standalone mode you can do :
L1240-4#sh lw reap association
Address : 0021.a00e.6426 Name : SEP0021A00E6426
IP Address : 192.168.35.104 Interface : Dot11Radio 1
Device : CP-7921 Software Version : NONE
CCX Version : 4 Client MFP : Off

When the AP is switching between modes you’ll see :

%LWAPP-5-CHANGED: LWAPP changed state to JOIN
or
%LWAPP-3-CLIENTERRORLOG: GOING BACK TO DISCOVER MODE
%WIDS-6-DISABLED: IDS Signature is removed and disabled.
L1240-4#
%LWAPP-5-CHANGED: LWAPP changed state to DISCOVERY

Radius accounting is not working when the AP is at HREAP Mode.

About Joost van der Made

Me

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: