Basic IOS WPAPSK Configuration


First of all we’re going to create the VLAN’s and assign this subinterface to a bridge-group :

interface Dot11Radio0.1
encapsulation dot1Q 1
bridge-group 1
!
interface Dot11Radio0.2
encapsulation dot1Q 2 native
bridge-group 2

And don’t forget to configure also the subinterfaces on the FastEthernet Interface :

interface FastEthernet0.1
encapsulation dot1Q 1
bridge-group 1
!
interface FastEthernet0.2
encapsulation dot1Q 2 native
bridge-group 2

If needed configure :
bridge 1 route ip

The encryption is configured on the Radio Interface for all vlan’s.
If you’re using b/g and a radio, don’t forget to configure it on bot interfaces.
int dot 0
encryption vlan 1 mode ciphers tkip
int dot 1
encryption vlan 1 mode ciphers tkip

The other vlan can be another authentication method. We don’t configure it yet.

Now we’re going to configure the SSID :
dot11 ssid wpapsk
authentication open
authentication key-management wpa
wpa-psk ascii Cisco123
vlan 1

Connect the SSID to the Radio
int do0
ssid wpapsk

About Joost van der Made

Me

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: