Upgrading Autonomous AP


The image of an AP is slightly different then from a router.
To upgrade the AP you can use the GUI or CLI.

The command for the CLI is :
archive download-sw /overwrite /reload tftp://192.168.1.1/c1240-k9w7-tar.124-10b.JDA.tar

If you have space enough at the flash and you want to have the old and new image on the flash, use the command :
archive download-sw /leave-old-sw /reload tftp://192.168.1.1/c1240-k9w7-tar.124-10b.JDA.tar

If there isn’t enough space on the flash, you will receive an error and the new image is NOT download to the flash.

About Joost van der Made

Me

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: